3 Ton Manual Carriage 4 Moving Rope Overhead Crane

What is 3 Ton Manual Carriage 4 Moving Wire Rope Overhead Crane?

Vinsan branded 3 Ton Manual Carriage 4 Moving Rope Overhead Cranes are a more compact design of 3 Ton Fixed Suspended 2 Moving Rope Overhead Cranes with changes made on the trolley and panel. It provides the advantage of safe working and easy assembly in different areas and conditions. They have a wide range of carrying capacities, operating speeds and insulation properties according to the structural features of the loads to be transported, lifting heights and weights. Electric Monorail 4 Moving Wire Rope Overhead Cranes have the option to be manufactured according to different energy supply demands in many different countries. Our products, which are produced in accordance with international norms, comply with CE and TSE standards. Manual Monorail Cranes are guaranteed for 3 years and parts for 10 years.

Technical Specifications of 3 Ton Manual Carriage 4 Moving Wire Rope Overhead Cranes

Crane Voltage: 220380-400V (Special Production Can Be Made).
Frequency: 50-60Hz (Special Production Can Be Made).
Control Voltage: 24 V Protection Class IP55 (EN 60529).

Working Conditions of 3 Ton Manual Carriage 4 Moving Wire Rope Overhead Cranes

Normal, windy or humid environment;
Normal, Salty and chemical environment;
Ambient Temperature;
Normal: -25 to +40;
Low: -40 to +40;
(Special Production Can Be Made).

3 Ton Manual Carriage 4 Moving Wire Rope Overhead Crane Electrical Panel

They have IP54 AND IP55 protection class. The electrical equipment of the crane is located in the panel. It contains materials such as phase protection and contactors for the safe operation of the electric motors of the equipment.

3 Ton Manual Carriage 4 Moving Rope Roof Crane Control and Button

The number of buttons varies according to standard and sensitive handling, as well as the number of movements. Remote and wired control options are available. There is an emergency stop button for emergencies. It is produced according to IP 65 protection class.

3 Ton Manual Carriage 4 Moving Wire Rope Overhead Crane Movement Mechanism

Monorail movement mechanisms move with electric motor drive. The motors are with brake and conical rotor. The engine speed can be made during construction or with revision according to the requested speed. Monorail movement mechanisms with F type isolation class are in IP55 protection class. It can be adjusted between 90 and 320 mm according to the volume of the rails on which they move.

1. Monorail 4 Moving Rope Roof Crane Gearbox: Gearboxes are parts of the forefront of safety and quality for the healthy and long-lasting operation of the cranes, which must be manufactured with heat-treated high-quality materials. The compact designs of the gearboxes provide the torque of the crane motor to the drum for safe movement. Double-stage planetary gearboxes are used in the body of the electric winch.
2. Monorail 4 Moving Rope Ceiling Crane Connection Coupling: It is the crane connection coupling that provides the transfer of the torque in the motor from the motor shaft to the gearbox with the help of the reducer shaft. It provides a healthy transfer of momentum and efficient and healthy use of crane energies.
3. Monorail 4 Moving Rope Ceiling Crane Drum: It is the part that converts the moment created by the crane motor through the reducer into lifting force through the rope wrapped around the loads. In order to ensure the correct movement of the ropes on them, the drums are manufactured as cast iron or steel drawing with grooved channels. There are guides and sets on the drums to prevent the ropes from overlapping and to ensure sequential movement.
4. Monorail 4 Moving Rope Ceiling Crane Body: The body, which is manufactured as a welded construction from steel material, has an electric motor on one side and a reducer on the other. The fixed end of the rope is connected to the body and the running system, if any, is mounted on the body. Different hardware mechanisms are provided by the installation of additional carrier equipment.
5. Monorail 4 Moving Rope Roof Crane Rope Guide: These are the parts that provide safe winding of the crane ropes. It is located around the winch drum and provides sequential winding of the ropes. It provides long-lasting and safe use by preventing the scales and abrasion of the ropes.
6. Monorail 4 Moving Rope Roof Crane Hoist Motor: They are used to provide high starting torque according to the capacity of the loads to be lifted. Conical rotor and magnetic brake motors are produced as two or three phase. Motors that receive command via contactors in the panel can be used safely at high or low speeds.
7. Monorail 4 Moving Rope Ceiling Crane Hook: Monorail Crane hooks are high-strength parts that work on the ropes between 1 and 8 knots, depending on the nature and capacity of the load to which the loads are attached. Safety hooks on the crane hooks ensure the safe transportation of loads.

3 Ton Manual Carriage 4 Moving Wire Rope Overhead Crane Pricing

The product that can differ structurally according to the customer's preference for our prices, verification can be made after all of these criteria have been evaluated. It is produced in 3 days to 7 days with the order as a demounted package.